Thrane / Cobham Sailor Fleet BroadBand and Bgan Explorer Device
Firmware versions that support tracking
Sailor 500 All firmware versions
Sailor 250 All firmware versions
Sailor 150 IMPORTANT FIRMWARE UPDATE: Firmware version 1.21 and higher support built in tracking. Allow multiple PDP contexts on SAILOR 150 All firmware versions with an exception. A single PDP context is supported on Class 3 BGAN terminals, therefore, if you activate the tracking PDP context you cannot open a second context for background IP or streaming. You must disconnect the tracking PDP context first.
Explorer 727 Firmware 1.13 and higher
Explorer 325 IMPORTANT FIRMWARE UPDATE: Firmware version 1.21 and higher support built in tracking. Allow multiple PDP contexts on EXPLORER 325 Firmware 1.13 and higher with an exception. A single PDP context is supported on Class 3 BGAN terminals, therefore, if you activate the tracking PDP context you cannot open a second context for background IP or streaming. You must disconnect the tracking PDP context first.
Explorer 710 Firmware 1.05 and higher
Explorer 700 Firmware 3.07 and higher
Explorer 500 Firmware 3.03 and higher
Explorer 300 IMPORTANT FIRMWARE UPDATE: Firmware version 3.04 and higher support built in tracking. Allow multiple PDP contexts on EXPLORER 300 Firmware 3.03 and higher with an exception. A single PDP context is supported on Class 3 BGAN terminals, therefore, if you activate the tracking PDP context you cannot open a second context for background IP or streaming. You must disconnect the tracking PDP context first. Simultaneous Data and Tracking (Multiple PDP Contexts) In order to support simultaneous tracking and data connections, ensure that both the firmware version loaded and the SIM card installed support multiple PDP contexts.
Configuration
Logging Into Your Device
IMPORTANT: You must upgrade to firmware version 1.13 or greater to support this feature
Login to http://192.168.0.01 on the same network as your Fleet Broadband
Click on “Settings”
Click on “LAN”
Click on “Network User Groups”
Enter the following: Username: admin Password: 1234
Press “Login”
Configure Settings
Click on “Edit” next to “Default group”
Change “Automatic Activation” to “Enabled”
Press “Apply”
Click on the “Tracking” tab under “Settings” in the menu.
Enter the follow information under “SERVER CONNECTION” For “APN”, select “SIM default”
Server IP Address | 40.68.37.90 |
Server Port | 7474 |
Client Port | 7475 |
Encryption Key | 5b4b4d08f37eb950b58e93c77b6a2d34 |
Under “POSITION REPORTS”, select the “Extended” option
For “INTERNAL REPORT”, select “Enabled” and enter 15 minutes
For “DISTANCE REPORT”, select “Enabled”, enter 100 for “When moved” and a time of 5 minutes is recommended for “Max one report per”
Press “Apply”